Fiberglass Concrete Planters

After making the fiberglass concrete planters mold, everyone knows that the mold does polish the mold once. But not every situation is treated like this. It depends on the degree of damage of the mold after demolding before the mold is repaired to a certain extent. Therefore, Guangzhou FRP sculpture mold needs to be carefully inspected after demoulding. If found If there is a gap such as damage, the damaged part must be repaired.

1.Fiberglass concrete planters is necessary to apply the method of coarse polishing and grinding to remove some marks caused by the mold during demoulding. This step is rough grinding. Immediately afterwards, the fine polishing tool is used to carry out the traces generated when the coarse polishing tool is used. Then when using polishing materials, it is necessary to carefully check whether there are brightening material components in the polishing materials. After polishing, it is necessary to check the true brightness of the mold gel coat.

2.Making fiberglass concrete planters molds and repairing molds is a continuous process. The key to making molds with superior performance is to use high-quality special materials, as well as the environment for making molds and the correct process for making molds.

Hot Tags: fiberglass concrete planters, China fiberglass concrete planters manufacturers, suppliers, Fiberglass Concrete Planters, Plastic Concrete Planter, Concrete Plastic Flowerpot, Fiberglass Planter Mold, Silicone Flowerpot Mold, Outdoor Large Marble Plant Flower Pots