Rib Ideal Design

In order to overcome the problems that may be caused by large wall thickness, using is an effective method that can reduce wall thickness and increase rigidity. In general, the rigidity of a part can be enhanced by the following methods

1.Increased wall thickness;  Increase the modulus of elasticity (such as increasing the content of reinforcing fibers);

2.Considered in design. If the material used for the design does not meet the required stiffness, a material with a higher modulus of elasticity should be selected. The simple way is to increase the content of reinforcing fibers in the plastic. However, for a given wall thickness, this approach only yields a linear increase in stiffness. A more efficient approach is to use an optimized design. Due to the increased moment of inertia, the rigidity of the component increases. When optimizing the size, not only the issues that should be considered in engineering design, but also the technical issues related to production and appearance should be considered.