How To Demold The Gypsum Line Mold

Before demolding, you need to clean the mold, do not leave any residue, pour the gypsum line into the mold, wait until a certain time to remove the shelf, slowly peel the mold from the bottom, in the operation of this step, must be slow, must be stable, so that it seems that the gypsum line mold demoulding traces are more, in order to ensure the smooth progress of the gypsum line mold, there is a key technology, between the first step and the second step, it is necessary to use gypsum release agent, the role of this release agent is more obvious, Will let the plaster line complete the demolding, there will not be any flaws and burrs Many friends will be curious, gypsum line mold how to operate into gypsum line, in fact, gypsum line production is relatively simple, to ensure the quality of gypsum line products, the quality of the mold used is more important, then how to make gypsum line mold, Xiaobian will come to friends to say, first to start doing the above, then do both sides, and finally deal with the middle, each part is first from the low recess, and then to the high part. Then, when making the gypsum line mold, soak the brush with a brush, and then use the brush to absorb the soapy water, so that you can roughly mark the size and size of the gypsum line mold.