Essentials For The Purchase Of Gypsum Wire Molds

When buying gypsum wire mold, we must pay attention to whether the surface of the mold is smooth, whether the mold is straight, whether the surface has pores, whether the three-dimensional sense of the pattern is enough, in general, the surface pattern depth of the gypsum line mold is 1 cm away.
Plaster moldings are an ornament, available with various patterns, beautiful and practical and inexpensive. In the purchase of gypsum line should be a few points:
1. First of all, look at the depth of the pattern pattern, generally the concave and convex pattern of the plaster relief decoration product pattern should be more than 10mm, and the production is fine;
2. The second is to look at the surface finish, only after the plaster relief decoration products with delicate surface and smooth feel are installed and painted, there will be a good decorative effect;
3. If the surface is rough and not smooth, it will give people a feeling of shoddy after installing and painting;
4. Finally, depending on the price, compared with the price of high-quality gypsum relief decoration products, the price of inferior gypsum relief products is 1/3 to 1/2 cheaper. Although this low price is attractive to users, it often reveals defects after installation and use, resulting in regret;
5. The gypsum line mold must have residual gypsum residue after demolding. The traditional wiping method is manual work, which is costly and inefficient. The improved gypsum line line is equipped with a special gypsum cleaning machine, which requires the use of gypsum line cleaning brush rolls.